Maths Ten-Sided Spinning
Thanks for your support :)
Print out the template for the spinning wheels onto light card.
There are three wheels -
0 to 9
1 to 10
0 to 10 (O and 10 share a spot)
Either right-click on the jpg image (right) and save it to your computer. Print it from there.
open the pdf doc (below) and select print.
Laminate the sheet of card.
Cut out each die and then punch or pierce a small hole in the centre of the spinning die. The hole must be quite a bit smaller than the piece of dowel you are going to insert through it, or the die will not hold tight when you spin it.
Use a pencil sharpener to sharpen the end of a pencil sized piece of dowel to a point. Insert it through the hole. It must fit tightly to work.