Torn Paper Flower Card
Materials Required
1. Sewing Machine with white cotton
2. Card: Dark brown; medium brown
3. Paper: I used Scenic Route Paper Company SR 267 - Cape Town Signal Hill Floral; Overton House Designs SCBP05 - Seaside - Dots / Green Solid
4. Embellishments: Kaiser Self adhesive Rhinestones
5. Cutting Tools: Paper Trimmer
6. Other: Punch Wheel
7. Adhesives: Double Sided sticky Tape (DSST)
1. Sewing Machine with white cotton
2. Card: Dark brown; medium brown
3. Paper: I used Scenic Route Paper Company SR 267 - Cape Town Signal Hill Floral; Overton House Designs SCBP05 - Seaside - Dots / Green Solid
4. Embellishments: Kaiser Self adhesive Rhinestones
5. Cutting Tools: Paper Trimmer
6. Other: Punch Wheel
7. Adhesives: Double Sided sticky Tape (DSST)
|
Instructions
1. Fold the Medium Brown Card 300mm x 150mm in half to make a base card. 2. Cut a piece of Seaside Paper 142mm x 142mm. Tear a flower from the Cape Town Paper and attach it to the Seaside paper using a small piece of DSST in the centre of the flower. 3. Sew zigzag around the outside of the torn flower. 4. Back this with a piece of dark brown card 145mm x 145mm using DSST, then attach it to the base card. 5. Cut two strips of dark brown card 6mm wide, one 145mm long and the other 160mm long. Run a punch wheel along the long edges. Tear the ends on the diagonal. Attach them to the card using DSST, using the photo as a guide to placement. The top ends of the strips fold around the card and attach to the inside of the card. If you don't have a punch wheel you can use a pin or needle to punch the card. Another alternative would be to use narrow dark brown ribbon. 6. Randomly attach some rhinestones over a few of the the spots. |
|